ENH202
Wireless-N Long Range Outdoor AP/CB
Downloads
* Firmware is intended for official EnGenius products sold in Australia. Do not install firmware from overseas websites without checking compatibility.
Product Overview
Description
ENH202 Wireless Outdoor CPE features 10dBi high gain antenna dual polarization with high output power and high sensitivity can extend the transmission range to deliver a stable wireless connection. ENH202 integrates 4 operation modes: Access Point, Client Bridge, Client Router and WDS.
With integrated 10dBi dual-polarized antenna and high output power, it’s convenient to build up to 20km long range wireless link while reducing dead spots. Advanced multi-function operation modes offer flexibility in constructing scalable wireless networks for all possible applications. ENH202 is designed to deliver reliable service under harsh outdoor environment with certified IP55 protection and tailored to accommodate multimedia streaming services with data-rate up to 300Mbps. Most importantly, it is built-in encryption standards (WEP, WPA, WPA2, TKIP/AES and IEEE802.1x) ensure maximum security and compatibility.
Power Source
EPA2406FP PoE Injector, EPA2406GP PoE Injector
Features
Features & Benefits
*NEW FEATURES AFTER FIRMWARE UPGRADE TO v1.1.8
- SUPPORT 2.5~2.6G FREQUENCY
- ENHANCE MULTICAST
- ENHANCE G MODE THROUGHPUT PERFORMANCE
- ADD WDS LINK STATUS
- SUPPORT VLAN PASS-THROUGH ON WDS BRIDGE
- SUPPORT RADIUS ACCOUNTING
- SUPPORT AUTO REBOOT
- SUPPORT DAYLIGHT SAVING
- SUPPORT OBEY REGULATORY POWER
| Features | Benefits |
| High Output Power up to 28dBm | Transmit output power programmable for different country selections |
| High Speed Data Rate up to 300Mbps | High speed transmitting rate up to 300Mbps with 2T2R 802.11n |
| Long Range Transmitting | Transmit power control and distance control (ACK timeout) |
| Signal Strength Display | LED indicators have the best transmit and receive signal for traffic communication |
| Narrow Bandwidth | Provide 5MHz/10MHz/20MHz bandwidth selection |
| 802.11i & 802.1x | WPA, WPA2 & IEEE802.1x Authenticator |
| Support Multi-SSID Function |
4 SSID supported. Each SSID can set itself wireless or WAN access setting |
| PPPoE Function Support (CR Mode) | Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected |
| PPTP | Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks |
| Firmware Upgrade | Upgrading firmware via web browser, setting are reserved after upgrade |
| Ping & Trace Route | Built-in PING function & Trace Route function in Web GUI |
| Reset & Backup | Reset to factory default. User can export all setting into a file via WEB |
| SNMP Remote Configuration Management | Help administrators to remotely configure or manage the Access Point easily. |
| QoS (WMM) | Enhance user performance and density |
Online Support
For further product support, call 1300 725 323.