Two EnGenius EAP1300 are configured in WDS bridge mode interconnected with 5GHz link. Throughput results are shown below.

1) Two APs are placed within 2 metres and it reveals the best performance of the AP which can achieve up to 580 Mbits/sec. (Note: Tx Power is reduced to 13dbm due to the short distance.)

2) Two APs are placed within 8 metres and several barriers are located in between. The results are shown below. (Note: Tx Power is set to 13dbm.)

3) Two APs are located as the same position as above but a wall is located in between. The results are shown below. (Note: Tx power is set to 13dbm.)

4) Two APs are located in the position as above but the Tx power has changed to 18dbm.

5) Two APs are located in the position as above but the Tx power has changed to 19dbm.

6) Two APs are located in the position as above but the Tx power has changed to 20dbm.

7) Two APs are located in the position as above but the Tx power has changed to 23dbm.

Two APs are configured as WDS Access Point mode where the 5GHz SSID is broadcasted and available to be connected. The throughput results are shown below.

8) The distance between two APs is around 2 metres. (Note: Tx power is set to 13dbm.)

9) Two APs are placed within 8 metres and several barriers are located in between. The results are shown below. (Note: Tx Power is set to 13dbm.)

10) Two APs are located in the position as above but Tx Power of both APs are set to 18dbm.

11) Two APs are located in the position as above but Tx Power of both APs are set to 19dbm.

12) Two APs are located in the position as above but Tx Power of both APs are set to 20dbm.